ZOEK NU NAAR AL UW EMUGE OPLOSSINGEN
Radwell staat klaar om te voorzien in al uw behoeften voor de productievloer.
Radwell is geen erkende distributeur, wederverkoper of vertegenwoordiger van de producten op deze website. Alle productnamen, handelsmerken, merken en logo's op deze site zijn eigendom van hun respectievelijke eigenaars. De weergave, beschrijving of verkoop van producten met deze namen, handelsmerken, merken en logo's is uitsluitend voor identificatiedoeleinden en is niet bedoeld om enige band met of goedkeuring door een rechtenhouder aan te geven.
Resultaten filteren
EMUGE
C0513500.5905
1/8-27 NPS, 45° HELIX, 4 FLUTES, BOTTOMING CHAMFER, BRIGHT FINISH, COBALT, SPIRAL FLUTE PIPE TAP RIGHT HAND FLUTE, 0.2756" SHANK DIAM, 0.7087" THREAD LENGTH, 0.2165" SQUARE SIZE, SERIES ENOR ...
✓ OP VOORRAAD!
€81,76
Prijs met btw:
€97,30
EMUGE
L0100100.0100
PLUG THREAD GAGE: M10X1.5 THREAD, 6H CLASS, DOUBLE END, GO & NO GO HANDLE INCLUDED (MOQ=1, PKG QTY=1)
✓ OP VOORRAAD!
€67,57
Prijs met btw:
€80,41
EMUGE
F3301H38
TAPPING CHUCK: 1-1/4" SHANK DIA, STRAIGHT SHANK, TENSION & COMPRESSION M3 TO M14 CAPACITY, 1.534" PROJECTION, THROUGH COOLANT (MOQ=1, PKG QTY=1)
€601,68
Prijs met btw:
€715,99
EMUGE
6494.401406
MILLING CHUCKS; TAPER SIZE: CAT40 ; SHANK TYPE: TAPER ; COOLANT TYPE: INTERNAL ; COOLANT THROUGH: YES ; UNSPSC CODE: 27112809, (MOQ=1, PKG QTY=1)
€507,47
Prijs met btw:
€603,89
EMUGE
GZ340153
INDEXABLE THREAD MILL: 1.585" CUT DIA, 4.331" MAX HOLE DEPTH, INTERNAL TAKES (4) INSERTS, 1-1/4" SHANK DIA, THROUGH COOLANT (MOQ=1, PKG QTY=1)
€615,90
Prijs met btw:
€732,92
EMUGE
CW193000.5790
1-1/2 - 11-1/2 NPTF, 5 FLUTES, BRIGHT FINISH, COBALT, INTERRUPTED THREAD PIPE TAP 7.48 INCH OVERALL LENGTH, 1-1/2 INCH SHANK DIAMETER, 1-3/4 INCH THREAD LENGTH, 1.12 INCH SQUARE SIZE, MODIFI ...
€620,34
Prijs met btw:
€738,20
EMUGE
F3301H36
TAPPING CHUCK: 1" SHANK DIA, STRAIGHT SHANK, TENSION & COMPRESSION M3 TO M14 CAPACITY, 1.534" PROJECTION (MOQ=1, PKG QTY=1)
€601,68
Prijs met btw:
€715,99
EMUGE
F3303H38
TAPPING CHUCK: 1-1/4" SHANK DIA, STRAIGHT SHANK, TENSION & COMPRESSION M4.5 TO M24 CAPACITY, 2.4803" PROJECTION, THROUGH COOLANT (MOQ=1, PKG QTY=1)
€710,10
Prijs met btw:
€845,02
EMUGE
F3303H40
TAPPING CHUCK: 1-1/2" SHANK DIA, STRAIGHT SHANK, TENSION & COMPRESSION M4.5 TO M24 CAPACITY, 2.4803" PROJECTION, THROUGH COOLANT (MOQ=1, PKG QTY=1)
€710,10
Prijs met btw:
€845,02
EMUGE
GF342106.5013
HELICAL FLUTE THREAD MILL: 1/2-13, INTERNAL, 4 FLUTE, 14.00 MM SHANK DIA, SOLID CARBIDE 13 TPI, 0.4070 MM CUT DIA, 1.2670" LOC, 3.7800" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€581,23
Prijs met btw:
€691,67
EMUGE
F3153H36.1.44
TAPPING CHUCK: 1" SHANK DIA, STRAIGHT SHANK, TENSION & COMPRESSION 3.437" PROJECTION, THROUGH COOLANT (MOQ=1, PKG QTY=1)
€671,89
Prijs met btw:
€799,54
EMUGE
GZ340101
INDEXABLE THREAD MILL: 3.543" MAX HOLE DEPTH, INTERNAL TAKES (3) INSERTS, THROUGH COOLANT (MOQ=1, PKG QTY=1)
€509,25
Prijs met btw:
€606,00
EMUGE
CU503200.5261
HAND TAPS FOR CAST IRON, SPIRAL FLUTE TAP: #2-8 UNS, 6 FLUTES, MODIFIED BOTTOMING, 2B CLASS OF FIT, COBALT, OXIDE COATED
€1.621,06
Prijs met btw:
€1.929,06
EMUGE
CU503210.5022
HAND TAPS FOR CAST IRON, SPIRAL FLUTE TAP: 1-1/2-6 UNC, 4 FLUTES, MODIFIED BOTTOMING, 3B CLASS OF FIT, COBALT, OXIDE COATED
€478,14
Prijs met btw:
€568,99
EMUGE
GZ340001
INDEXABLE THREAD MILL: 0.94" CUT DIA, 3.15" MAX HOLE DEPTH, INTERNAL, (MOQ=1, PKG QTY=1)
€493,25
Prijs met btw:
€586,97
EMUGE
GZ340012
INDEXABLE THREAD MILL: 1.293" CUT DIA, 3.74" MAX HOLE DEPTH, INTERNAL, (MOQ=1, PKG QTY=1)
€510,14
Prijs met btw:
€607,06
EMUGE
GZ340143
INDEXABLE THREAD MILL: 1.585" CUT DIA, 5.709" MAX HOLE DEPTH, INTERNAL, (MOQ=1, PKG QTY=1)
€730,54
Prijs met btw:
€869,35
EMUGE
6494.402006
CAT40 MILLING CHUCK: 20 MM HOLE DIA, (MOQ=1, PKG QTY=1)
€507,47
Prijs met btw:
€603,89
EMUGE
CU50C400.5020
SPIRAL FLUTE TAP: 1-1/4-7 UNC, 5 FLUTES, MODIFIED BOTTOMING, 2B CLASS OF FIT, COBALT, GLT-1 COATED, (MOQ=1, PKG QTY=1)
€487,03
Prijs met btw:
€579,56
EMUGE
GF422206.5011
HELICAL FLUTE THREAD MILL: 3/8-16, INTERNAL, 2 FLUTE, SOLID CARBIDE, (MOQ=1, PKG QTY=1)
€482,58
Prijs met btw:
€574,28
EMUGE
GFT53156.9679
STRAIGHT FLUTE THREAD MILL: INTERNAL, 5 FLUTES, 3/4" SHANK DIA, SOLID CARBIDE, (MOQ=1, PKG QTY=1)
€473,70
Prijs met btw:
€563,70
EMUGE
F0561304
TAPPING ADAPTER: 1/4" TAP, #1 ADAPTER 0.255" TAP SHANK DIA, 0.191" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€82,65
Prijs met btw:
€98,36
EMUGE
F0561307
TAPPING ADAPTER: 7/16" TAP, #1 ADAPTER 0.323" TAP SHANK DIA, 0.242" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€76,43
Prijs met btw:
€90,95
EMUGE
F0561310
TAPPING ADAPTER: 1/2" TAP, #1 ADAPTER 0.367" TAP SHANK DIA, 0.275" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€76,43
Prijs met btw:
€90,95
EMUGE
F0563311
TAPPING ADAPTER: 3/8" TAP, #3 ADAPTER 0.381" TAP SHANK DIA, 0.286" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM03 (MOQ=1, PKG QTY=1)
€98,65
Prijs met btw:
€117,39
EMUGE
F0561300
TAPPING ADAPTER: #0-#6 TAP, #1 ADAPTER 0.141" TAP SHANK DIA, 0.11" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€76,43
Prijs met btw:
€90,95
EMUGE
F0561303
TAPPING ADAPTER: #12 TAP, #1 ADAPTER 0.22" TAP SHANK DIA, 0.165" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€76,43
Prijs met btw:
€90,95
EMUGE
F0561306
TAPPING ADAPTER: 5/16" TAP, #1 ADAPTER 0.318" TAP SHANK DIA, 0.238" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€76,43
Prijs met btw:
€90,95
EMUGE
F0561311
TAPPING ADAPTER: 3/8" TAP, #1 ADAPTER 0.381" TAP SHANK DIA, 0.286" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€82,65
Prijs met btw:
€98,36
EMUGE
F0561302
TAPPING ADAPTER: #10 TAP, #1 ADAPTER 0.194" TAP SHANK DIA, 0.152" TAP SQUARE SIZE, THROUGH COOLANT, SERIES EM01 (MOQ=1, PKG QTY=1)
€76,43
Prijs met btw:
€90,95
EMUGE
BU50C460.5045
SPIRAL FLUTE TAP: 3/8-24, UNF, 3 FLUTE, 2-3 P, 3B CLASS OF FIT, HIGH SPEED STEEL-E, GLT-1 FINISH 3.937" OAL, LEFT HAND FLUTE, LEFT HAND THREAD, X, SERIES ENORM Z (MOQ=1, PKG QTY=1)
€87,99
Prijs met btw:
€104,70
EMUGE
GF173106.5763
STRAIGHT FLUTE THREAD MILL: 1/16-27, INTERNAL, 3 FLUTES, SOLID CARBIDE 27 TPI, 0.232" CUT DIA, 0.389" LOC, 2.165" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€324,39
Prijs met btw:
€386,02
EMUGE
GF332106.5043
HELICAL FLUTE THREAD MILL: 1/4-28, INTERNAL, 3 FLUTE, 8.00 MM SHANK DIA, SOLID CARBIDE 28 TPI, 0.2030 MM CUT DIA, 0.5170" LOC, 2.4410" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€290,62
Prijs met btw:
€345,83
EMUGE
GFT53136.9678
STRAIGHT FLUTE THREAD MILL: 1/2 & 3/4, INTERNAL, 4 FLUTES, 5/8" SHANK DIA, SOLID CARBIDE 14 TPI, 0.561" CUT DIA, 0.75" LOC, 3.5" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€337,72
Prijs met btw:
€401,89
EMUGE
GF162316.9579
HELICAL FLUTE THREAD MILL: 1/2-24, INTERNAL, 4 FLUTE, SOLID CARBIDE 24 TPI, 0.394" CUT DIA, 0.787" LOC, 3.15" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€378,60
Prijs met btw:
€450,54
EMUGE
6638.200500
1/2", SERIES FPC20, STANDARD HIGH PRECISION FPC COLLET (MOQ=1, PKG QTY=1)
€143,09
Prijs met btw:
€170,27
EMUGE
GFS33106.5011
SINGLE PROFILE THREAD MILL: 3/8-16, 16 TO 28 TPI, INTERNAL, 5 FLUTES, SOLID CARBIDE 0.301" CUT DIA, 5/16" SHANK DIA, 2.5" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€177,75
Prijs met btw:
€211,52
EMUGE
GFS33106.5016
3/4-10 0.63" CUT DIAM INTERNAL 6-FLUTE SOLID CARBIDE SINGLE-PROFILE THREAD MILL TICN FINISH, 5/8" SHANK DIAM, 4-1/4" OAL
€260,40
Prijs met btw:
€309,88
EMUGE
GFS23706.5006
SINGLE PROFILE THREAD MILL: #6, 32 TO 36 TPI, INTERNAL, 3 FLUTES, SOLID CARBIDE 0.124" CUT DIA, 1/8" SHANK DIA, 1.625" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€135,98
Prijs met btw:
€161,81
EMUGE
GFS33106.5012
SINGLE PROFILE THREAD MILL: 12-20, 14 TO 28 TPI, INTERNAL, 5 FLUTES, SOLID CARBIDE 0.354" CUT DIA, 3/8" SHANK DIA, 3" OAL, TICN COATED (MOQ=1, PKG QTY=1)
€194,63
Prijs met btw:
€231,61
EMUGE
EFUT3300.0635
SPOTTING DRILL: 1/4" DIA, 142 ° POINT, 2-1/2" OAL, SOLID CARBIDE 3/4" FLUTE LENGTH, 1/4" SHANK DIA, TIALN COATED, RIGHT HAND CUT, SERIES EFUT3300 (MOQ=1, PKG QTY=1)
€42,66
Prijs met btw:
€50,76
EMUGE
EFUT3300.1270
SPOTTING DRILL: 1/2" DIA, 142 ° POINT, 3" OAL, SOLID CARBIDE 1" FLUTE LENGTH, 1/2" SHANK DIA, TIALN COATED, RIGHT HAND CUT, SERIES EFUT3300 (MOQ=1, PKG QTY=1)
€113,76
Prijs met btw:
€135,37
EMUGE
BU50C460.5043
SPIRAL FLUTE TAP: 1/4-28, UNF, 3 FLUTE, 2-3 P, 3B CLASS OF FIT, HIGH SPEED STEEL-E, GLT-1 FINISH 3.15" OAL, LEFT HAND FLUTE, LEFT HAND THREAD, X, SERIES ENORM Z (MOQ=1, PKG QTY=1)
€68,43
Prijs met btw:
€81,44
EMUGE
EFUT3300.0952
SPOTTING DRILL: 3/8" DIA, 142 ° POINT, 3" OAL, SOLID CARBIDE 1" FLUTE LENGTH, 3/8" SHANK DIA, TIALN COATED, RIGHT HAND CUT, SERIES EFUT3300 (MOQ=1, PKG QTY=1)
€71,10
Prijs met btw:
€84,61
EMUGE
CU50C460.5049
SPIRAL FLUTE TAP: 5/8-18, UNF, 5 FLUTE, 2-3 P, 3B CLASS OF FIT, HIGH SPEED STEEL-E, GLT-1 FINISH 3.937" OAL, LEFT HAND FLUTE, LEFT HAND THREAD, X, SERIES ENORM Z (MOQ=1, PKG QTY=1)
€151,09
Prijs met btw:
€179,79
EMUGE
2644T.012
ROUGHING & FINISHING END MILL: 12 MM DIA, 5 FLUTES, SQUARE END, SOLID CARBIDE 36 MM LOC, 93 MM OAL, 12 MM SHANK DIA, 42 ° HELIX, TIN/TIALN COATED, SERIES 2644T (MOQ=1, PKG QTY=1)
€180,41
Prijs met btw:
€214,69
