ZOEK NU NAAR AL UW IRONHORSE OPLOSSINGEN
Radwell staat klaar om te voorzien in al uw behoeften voor de productievloer.
Radwell is geen erkende distributeur, wederverkoper of vertegenwoordiger van de producten op deze website. Alle productnamen, handelsmerken, merken en logo's op deze site zijn eigendom van hun respectievelijke eigenaars. De weergave, beschrijving of verkoop van producten met deze namen, handelsmerken, merken en logo's is uitsluitend voor identificatiedoeleinden en is niet bedoeld om enige band met of goedkeuring door een rechtenhouder aan te geven.
Resultaten filteren
AUTOMATION DIRECT
IRONHORSE
WGA-63M-ACC4
IRONHORSE GEARBOX DOUBLE OUTPUT SHAFT, 1.125IN. FOR USE WITH WGA-63M NEMA SERIES GEARBOXES. (4) KEYS, (2) SPACERS AND (2) RETAINING RINGS INCLUDED.
€48,20
Prijs met btw:
€57,36
AUTOMATION DIRECT
IRONHORSE
WGA-50M-ACC2
IRONHORSE TORQUE ARM, FOR USE WITH ALL WGA-50M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€25,88
Prijs met btw:
€30,80
AUTOMATION DIRECT
IRONHORSE
MTAR-SHROUD-56
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR SERIES MOTORS. NOT COMPATIBLE WITH MTR2 SERIES MOTORS.
€16,07
Prijs met btw:
€19,12
AUTOMATION DIRECT
IRONHORSE
MTA-CSW-04
IRONHORSE STATIONARY SWITCH, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€23,21
Prijs met btw:
€27,62
AUTOMATION DIRECT
IRONHORSE
MTA-CSW-03
IRONHORSE CENTRIFUGAL SWITCH, REPLACEMENT. FOR USE WITH 56C FRAME 3600RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€23,21
Prijs met btw:
€27,62
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L197
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 197RPM, 12 LB-IN FULL LOAD TORQUE, 0.68 FLA, 9.75:1 RATIO, 1/2IN SHAFT DIAMETER.
€414,15
Prijs met btw:
€492,84
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L093
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 93RPM, 23 LB-IN FULL LOAD TORQUE, 0.68 FLA, 20.5:1 RATIO, 1/2IN SHAFT DIAMETER.
€414,15
Prijs met btw:
€492,84
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P20-1J084
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/5HP, 12 VDC, 84RPM, 112 LB-IN FULL LOAD TORQUE, 15.7 FLA, 20:1 RATIO, 5/8IN SHAFT DIAMETER.
€419,51
Prijs met btw:
€499,22
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L061
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 61RPM, 130 LB-IN FULL LOAD TORQUE, 1.59 FLA, 30:1 RATIO, 5/8IN SHAFT DIAMETER.
€405,23
Prijs met btw:
€482,22
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P06-1J050
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/16HP, 12 VDC, 50RPM, 45 LB-IN FULL LOAD TORQUE, 3.88 FLA, 55:1 RATIO, 5/16IN SHAFT DIAMETER.
€238,32
Prijs met btw:
€283,60
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P06-1J034
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/16HP, 12 VDC, 34RPM, 45 LB-IN FULL LOAD TORQUE, 2.86 FLA, 83:1 RATIO, 5/16IN SHAFT DIAMETER.
€259,74
Prijs met btw:
€309,09
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P06-1J024
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/16HP, 12 VDC, 24RPM, 50 LB-IN FULL LOAD TORQUE, 2.41 FLA, 120:1 RATIO, 5/16IN SHAFT DIAMETER.
€255,28
Prijs met btw:
€303,78
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSDA-ACCDEC-4
IRONHORSE GSD4 SERIES ACCELERATION/DECELERATION MODULE, FOR USE WITH GSD4 SERIES DC DRIVES.
€24,99
Prijs met btw:
€29,74
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTSS-P75-3BD36
IRONHORSE MTS STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 3/4HP, 3-PHASE, 208-230/460 VAC, 3600RPM, TEFC, 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT. CABLE GLAND IN ...
€348,10
Prijs met btw:
€414,24
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTSS-P75-3BD18R
IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 3/4HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, 56C FRAME, 304 STAINLESS STEEL, C-FACE MOUNT. CABLE GLAND INCLUDED.
€347,21
Prijs met btw:
€413,18
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTSS-P75-3BD18
IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 3/4HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT. CABLE GLAND INC ...
€360,60
Prijs met btw:
€429,11
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTSS-P50-3BD36
IRONHORSE MTS STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 1/2HP, 3-PHASE, 208-230/460 VAC, 3600RPM, TEFC, 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT. CABLE GLAND IN ...
€341,86
Prijs met btw:
€406,81
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-04
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1-1/2HP 1800RPM IRONHORSE MTR SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR2 SERIES MOTORS.
€13,39
Prijs met btw:
€15,93
AUTOMATION DIRECT
IRONHORSE
WG-262-010-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182TC INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.17HP AT 1.0 SF, 1445 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DIST ...
€368,63
Prijs met btw:
€438,67
AUTOMATION DIRECT
IRONHORSE
WG-262-015-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.22HP AT 1.0 SF, 1577 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, CA ...
€318,65
Prijs met btw:
€379,19
AUTOMATION DIRECT
IRONHORSE
WG-262-060-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, CA ...
€318,65
Prijs met btw:
€379,19
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-21
IRONHORSE RUN CAPACITOR, REPLACEMENT. FOR USE WITH 5HP 1800RPM IRONHORSE FARM DUTY MTF SERIES 1-PHASE AC MOTORS.
€27,67
Prijs met btw:
€32,93
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-14
IRONHORSE RUN CAPACITOR, REPLACEMENT. FOR USE WITH 1-1/2 AND 2HP IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€41,06
Prijs met btw:
€48,86
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-13
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 3/4HP 1800RPM, 1HP 1800RPM AND 1HP 3600RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€41,06
Prijs met btw:
€48,86
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-12
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1/2HP 1800RPM AND 3/4HP 3600RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€28,56
Prijs met btw:
€33,99
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-4
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/4HP AND 1/5HP 12 VDC OR 24 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. (2) ...
€36,06
Prijs met btw:
€42,91
AUTOMATION DIRECT
IRONHORSE
MTGA-KIT-1
IRONHORSE DC MOTOR SPARE PARTS KIT, FOR USE WITH IRONHORSE 1/4HP AND SMALLER MTPM, MTGR AND MTGP SERIES DC MOTORS AND GEARMOTORS, INCLUDES (2) METAL BRUSH CAP COVERS, (1) TERMINAL BOX, (1) 1 ...
€55,34
Prijs met btw:
€65,85
AUTOMATION DIRECT
IRONHORSE
GSDA-HTSNK-4
IRONHORSE GSD SERIES HEATSINK, FOR USE WITH GSD4 SERIES DC DRIVES.
€38,38
Prijs met btw:
€45,67
AUTOMATION DIRECT
IRONHORSE
GSD7-240-1CR3
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 240 VAC, 1-PHASE, 1/25 TO 1/4HP AT 180 VDC, 1.2A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 3 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUT ...
€267,77
Prijs met btw:
€318,65
AUTOMATION DIRECT
IRONHORSE
GSD3-24A-3N4
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 12/24 VAC, 1-PHASE, 1/50 TO 1/25HP AT 12 VDC AND 1/25 TO 1/12HP AT 24 VDC, 3A, NEMA 4, WALL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, ...
€171,37
Prijs met btw:
€203,93
AUTOMATION DIRECT
IRONHORSE
GSD3-24A-2CL
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 12/24 VAC, 1-PHASE, 1/50 TO 1/40HP AT 12 VDC AND 1/25 TO 1/20HP AT 24 VDC, 2A, OPEN FRAME, L STYLE MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER ...
€95,51
Prijs met btw:
€113,65
AUTOMATION DIRECT
IRONHORSE
GSD3-24A-2CJ
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 12/24 VAC, 1-PHASE, 1/50 TO 1/40HP AT 12 VDC AND 1/25 TO 1/20HP AT 24 VDC, 2A, OPEN FRAME, J STYLE MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER ...
€92,83
Prijs met btw:
€110,46
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-08
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1-1/2HP 3600RPM IRONHORSE MTR SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR2 SERIES MOTORS.
€13,39
Prijs met btw:
€15,93
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-02
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1/2 AND 3/4HP 1800RPM IRONHORSE MTR SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR2 SERIES MOTORS.
€13,39
Prijs met btw:
€15,93
AUTOMATION DIRECT
IRONHORSE
WG-206-060-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 0.6HP AT 1.0 SF, 750 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, C ...
€353,46
Prijs met btw:
€420,62
AUTOMATION DIRECT
IRONHORSE
WG-262-010-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182TC INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.17HP AT 1.0 SF, 1445 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
€318,65
Prijs met btw:
€379,19
AUTOMATION DIRECT
IRONHORSE
WG-206-040-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, DUAL, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1.09HP AT 1.0 SF, 1120 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, CAST ...
€270,45
Prijs met btw:
€321,83
AUTOMATION DIRECT
IRONHORSE
WG-237-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.57HP AT 1.0 SF, 798 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE ...
€315,97
Prijs met btw:
€376,00
AUTOMATION DIRECT
IRONHORSE
WG-206-010-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, DUAL, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2.77HP AT 1.0 SF, 935 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, CAST I ...
€262,42
Prijs met btw:
€312,28
AUTOMATION DIRECT
IRONHORSE
WG-206-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 3.62HP AT 1.0 SF, 685 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, C ...
€262,42
Prijs met btw:
€312,28
AUTOMATION DIRECT
IRONHORSE
WG-206-005-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.62HP AT 1.0 SF, 685 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, C ...
€353,46
Prijs met btw:
€420,62
AUTOMATION DIRECT
IRONHORSE
WG-175-015-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.24HP AT 1.0 SF, 554 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
€207,97
Prijs met btw:
€247,48
AUTOMATION DIRECT
IRONHORSE
WG-175-040-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, DUAL, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 0.74HP AT 1.0 SF, 714 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAS ...
€207,97
Prijs met btw:
€247,48
AUTOMATION DIRECT
IRONHORSE
WG-237-010-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.47HP AT 1.0 SF, 1158 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANC ...
€313,29
Prijs met btw:
€372,82
AUTOMATION DIRECT
IRONHORSE
MTA2-FAN-56-1
IRONHORSE COOLING FAN, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTRP SERIES MOTORS ONLY.
€17,85
Prijs met btw:
€21,24
AUTOMATION DIRECT
IRONHORSE
ACN-VFDS
IRONHORSE WINDOWS CONFIGURATION AND PROGRAMMING SOFTWARE, USB OR FREE DOWNLOAD. FOR USE WITH IRONHORSE ACG AND ACN SERIES DRIVES. REQUIRES PC SERIAL PORT, USB-RS232-1 OR USB-485M SERIAL ADAP ...
€10,71
Prijs met btw:
€12,75
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-444TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 444T AND 445T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT CO ...
€345,43
Prijs met btw:
€411,06
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-180TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 182T AND 184T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT CO ...
€45,52
Prijs met btw:
€54,17
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-210TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 213T AND 215T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT CO ...
€62,48
Prijs met btw:
€74,35
