ZOEK NU NAAR AL UW IRONHORSE OPLOSSINGEN
Radwell staat klaar om te voorzien in al uw behoeften voor de productievloer.
Radwell is geen erkende distributeur, wederverkoper of vertegenwoordiger van de producten op deze website. Alle productnamen, handelsmerken, merken en logo's op deze site zijn eigendom van hun respectievelijke eigenaars. De weergave, beschrijving of verkoop van producten met deze namen, handelsmerken, merken en logo's is uitsluitend voor identificatiedoeleinden en is niet bedoeld om enige band met of goedkeuring door een rechtenhouder aan te geven.
Resultaten filteren
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-210
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 213 AND 215 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€52,66
Prijs met btw:
€62,67
AUTOMATION DIRECT
IRONHORSE
MTAP2-FAN-250-2
IRONHORSE MTCP2 SERIES MAIN COOLING FAN, REPLACEMENT. FOR USE WITH 2-POLE 254 AND 256 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€68,73
Prijs met btw:
€81,79
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-250
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 254 AND 256 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€86,58
Prijs met btw:
€103,03
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-250TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 254T AND 256T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT CO ...
€91,93
Prijs met btw:
€109,40
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-440
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 444, 445 AND 447 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€277,59
Prijs met btw:
€330,33
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-280
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 284 AND 286 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€109,79
Prijs met btw:
€130,65
AUTOMATION DIRECT
IRONHORSE
MTAP2-SHROUD-140
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 143 AND 145 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€33,92
Prijs met btw:
€40,36
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-400TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 405T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT COMPATIBLE ...
€324,00
Prijs met btw:
€385,56
AUTOMATION DIRECT
IRONHORSE
MTAP2-FAN-320
IRONHORSE MTCP2 SERIES MAIN COOLING FAN, REPLACEMENT. FOR USE WITH 324 AND 326 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€122,28
Prijs met btw:
€145,52
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-320TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 324T AND 326T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT CO ...
€149,95
Prijs met btw:
€178,44
AUTOMATION DIRECT
IRONHORSE
MTCP2-003-3BD36
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 3HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 3600RPM, TEFC, NEMA 182T FRA ...
€417,72
Prijs met btw:
€497,09
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTAP2-FAN-360
IRONHORSE MTCP2 SERIES MAIN COOLING FAN, REPLACEMENT. FOR USE WITH 364 AND 365 FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. NOT COMPATIBLE WITH MTC OR MTCP SERIES MOTORS.
€198,15
Prijs met btw:
€235,80
AUTOMATION DIRECT
IRONHORSE
MTAP2-CFACE-140TC
IRONHORSE C-FLANGE, REPLACEMENT. FOR USE WITH 143T AND 145T FRAME IRONHORSE PREMIUM EFFICIENCY MTCP2 SERIES MOTORS. MOUNTING HARDWARE INCLUDED. REPLACES DRIVE END BELL, FIELD INSTALL. NOT CO ...
€33,92
Prijs met btw:
€40,36
AUTOMATION DIRECT
IRONHORSE
MTR2-P33-3BD36
AC INDUCTION MOTOR, STANDARD EFFICIENCY, GENERAL PURPOSE AND INVERTER RATED, 1/3HP, 3-PHASE, 230/460 VAC, 3600RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT.
€165,13
Prijs met btw:
€196,50
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WG-262-010-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 182TC INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.17HP AT 1.0 SF, 1445 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTA ...
€362,38
Prijs met btw:
€431,24
AUTOMATION DIRECT
IRONHORSE
WG-237-005-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 4.57HP AT 1.0 SF, 798 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANCE, ...
€315,97
Prijs met btw:
€376,00
AUTOMATION DIRECT
IRONHORSE
WG-175-015-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.24HP AT 1.0 SF, 554 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
€206,18
Prijs met btw:
€245,36
AUTOMATION DIRECT
IRONHORSE
WG-175-010-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, LEFT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 515 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE ...
€206,18
Prijs met btw:
€245,36
AUTOMATION DIRECT
IRONHORSE
WGA-30M-ACC5
IRONHORSE OUTPUT COVER, FOR USE WITH ALL WGA-30M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€7,50
Prijs met btw:
€8,92
AUTOMATION DIRECT
IRONHORSE
MTCP2-002-3BD36
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 2HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 3600RPM, TEFC, NEMA 145T FRA ...
€297,23
Prijs met btw:
€353,70
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WG-262-060-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANC ...
€362,38
Prijs met btw:
€431,24
AUTOMATION DIRECT
IRONHORSE
WG-262-040-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANC ...
€362,38
Prijs met btw:
€431,24
AUTOMATION DIRECT
IRONHORSE
WG-237-015-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.64HP AT 1.0 SF, 1249 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTANC ...
€313,29
Prijs met btw:
€372,82
AUTOMATION DIRECT
IRONHORSE
WG-206-015-L
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, LEFT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 2.09HP AT 1.0 SF, 1002 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, ...
€260,63
Prijs met btw:
€310,15
AUTOMATION DIRECT
IRONHORSE
WG-237-010-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.47HP AT 1.0 SF, 1158 LB-IN MECHANICAL OUTPUT TORQUE, 2-3/8IN CENTER DISTAN ...
€315,97
Prijs met btw:
€376,00
AUTOMATION DIRECT
IRONHORSE
MTPM-P13-1JK42
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/8HP, 12/24 VDC, 1825/4224RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€149,95
Prijs met btw:
€178,44
AUTOMATION DIRECT
IRONHORSE
MTSS-P33-3BD18
IRONHORSE MTS PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 1/3HP, 3-PHASE, 208-230/460 VAC, 1800RPM, TEFC, 56C FRAME, 304 STAINLESS STEEL, C-FACE/RIGID BASE MOUNT. CABLE GLAND INC ...
€343,64
Prijs met btw:
€408,93
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WG-262-020-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.67HP AT 1.0 SF, 1563 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, CA ...
€318,65
Prijs met btw:
€379,19
AUTOMATION DIRECT
IRONHORSE
WG-262-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.67HP AT 1.0 SF, 1563 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
€368,63
Prijs met btw:
€438,67
AUTOMATION DIRECT
IRONHORSE
WG-262-040-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, DUAL, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, CA ...
€318,65
Prijs met btw:
€379,19
AUTOMATION DIRECT
IRONHORSE
WGA-50M-080-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 80:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.35HP AT 1.0 SF, 546 LB-IN MECHANICAL OUTPUT TORQUE, 50MM CENTER DISTANCE, CAST AL ...
€211,54
Prijs met btw:
€251,73
AUTOMATION DIRECT
IRONHORSE
WGA-40M-ACC4
IRONHORSE GEARBOX DOUBLE OUTPUT SHAFT, 0.75IN. FOR USE WITH WGA-40M NEMA SERIES GEARBOXES. (4) KEYS, (2) SPACERS AND (2) RETAINING RINGS INCLUDED.
€32,13
Prijs met btw:
€38,24
AUTOMATION DIRECT
IRONHORSE
WGA-40M-ACC3
IRONHORSE GEARBOX SINGLE OUTPUT SHAFT, 0.75IN. FOR USE WITH WGA-40M NEMA SERIES GEARBOXES. (3) KEYS, (1) SPACER AND (1) RETAINING RING INCLUDED.
€24,99
Prijs met btw:
€29,74
AUTOMATION DIRECT
IRONHORSE
WGA-63M-ACC2
IRONHORSE TORQUE ARM, FOR USE WITH ALL WGA-63M SERIES GEARBOXES. MOUNTING HARDWARE INCLUDED.
€38,38
Prijs met btw:
€45,67
AUTOMATION DIRECT
IRONHORSE
MTA-CSW-08
IRONHORSE CENTRIFUGAL SWITCH, REPLACEMENT. FOR USE WITH 56C FRAME 1800RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€23,21
Prijs met btw:
€27,62
AUTOMATION DIRECT
IRONHORSE
MTA-CAP-10
IRONHORSE START CAPACITOR, REPLACEMENT. FOR USE WITH 1/3HP 3600RPM IRONHORSE MTR2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€25,88
Prijs met btw:
€30,80
AUTOMATION DIRECT
IRONHORSE
MTA2-SHROUD-56
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR2 AND MTRP SERIES MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€25,88
Prijs met btw:
€30,80
AUTOMATION DIRECT
IRONHORSE
MTA2-JBOX-56
IRONHORSE JUNCTION BOX, REPLACEMENT. FOR USE WITH 56C FRAME IRONHORSE MTR2 AND MTRP SERIES MOTORS. NOT COMPATIBLE WITH MTR SERIES MOTORS.
€25,88
Prijs met btw:
€30,80
AUTOMATION DIRECT
IRONHORSE
MTPM-BRUSH-6
IRONHORSE DC MOTOR BRUSHES, REPLACEMENT. PACKAGE OF 2. FOR USE WITH IRONHORSE 1/7HP AND 1/8HP 90 VDC OR 180 VDC MTPM, MTGR, MTGP AND VP1 SERIES PERMANENT MAGNET DC MOTORS AND GEARMOTORS. (2) ...
€29,75
Prijs met btw:
€35,40
AUTOMATION DIRECT
IRONHORSE
HBR-47-S
IRONHORSE GEARBOX SINGLE OUTPUT SHAFT, 1.25IN. FOR USE WITH HBR-47 SERIES GEARBOXES. (3) KEYS, (1) END PLATE, (1) LOCK WASHER AND (1) BOLT INCLUDED.
€52,66
Prijs met btw:
€62,67
AUTOMATION DIRECT
IRONHORSE
MTADP-OEB-140
IRONHORSE OPPOSITE DRIVE END ENDBELL, REPLACEMENT. FOR USE WITH 143T AND 145T FRAME IRONHORSE MTDP SERIES MOTORS.
€48,20
Prijs met btw:
€57,36
AUTOMATION DIRECT
IRONHORSE
MTAF2-SHROUD-210
IRONHORSE FAN SHROUD, REPLACEMENT. FOR USE WITH 215T FRAME IRONHORSE MTF2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTF SERIES MOTORS.
€63,37
Prijs met btw:
€75,41
AUTOMATION DIRECT
IRONHORSE
MTADP-CDR-320
IRONHORSE CURRENT DIVERTER RING, FOR USE WITH 324T AND 326T FRAME DRILL AND TAP MOTORS. MTDP SERIES MOTORS ARE DRILLED AND TAPPED FOR MOUNTING CURRENT DIVERTER RINGS, OTHERS WILL REQUIRE DRI ...
€420,40
Prijs met btw:
€500,28
AUTOMATION DIRECT
IRONHORSE
MTAF2-MOL-2
IRONHORSE MANUAL OVERLOAD SWITCH, REPLACEMENT. FOR USE WITH 3HP IRONHORSE MTF2 SERIES 1-PHASE AC MOTORS. NOT COMPATIBLE WITH MTF SERIES MOTORS.
€276,70
Prijs met btw:
€329,27
AUTOMATION DIRECT
IRONHORSE
ACNND-23P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 3HP WITH 3-PHASE INPUT, 1-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OP ...
€331,14
Prijs met btw:
€394,06
AUTOMATION DIRECT
IRONHORSE
ACN-ETH
IRONHORSE ACN SERIES COMMUNICATION MODULE, ETHERNET/IP AND MODBUS TCP, 1 PORT, (1) ETHERNET (RJ45) AND (1) RS-232 (RJ45) PORT(S). FOR USE WITH IRONHORSE ACN SERIES DRIVES. MOUNTING HARDWARE ...
€121,39
Prijs met btw:
€144,45
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSDA-HTSNK-4A
IRONHORSE GSD4A SERIES HEATSINK, FOR USE WITH IRONHORSE GSD4A-240-2C AND GSD4A-240-6C DC DRIVES.
€25,88
Prijs met btw:
€30,80
AUTOMATION DIRECT
IRONHORSE
GSDA-DP-S
IRONHORSE SIGNAL CONDITIONER, ISOLATED, INPUT: 1-CHANNEL, CURRENT/VOLTAGE, OUTPUT: 1-CHANNEL, CURRENT/VOLTAGE, 120/240 VAC OPERATING VOLTAGE, IP67, 1/8 DIN MOUNT.
€363,28
Prijs met btw:
€432,30
AUTOMATION DIRECT
IRONHORSE
GSDA-DP-D
IRONHORSE GSD SERIES PID DIGITAL POTENTIOMETER, 120/240 VAC INPUT, VOLTAGE, NEMA 4X, IP67, ALUMINUM HOUSING. FOR USE WITH MULTIPLE AC AND DC DRIVES.
€436,47
Prijs met btw:
€519,40
