ZOEK NU NAAR AL UW IRONHORSE OPLOSSINGEN
Radwell staat klaar om te voorzien in al uw behoeften voor de productievloer.
Radwell is geen erkende distributeur, wederverkoper of vertegenwoordiger van de producten op deze website. Alle productnamen, handelsmerken, merken en logo's op deze site zijn eigendom van hun respectievelijke eigenaars. De weergave, beschrijving of verkoop van producten met deze namen, handelsmerken, merken en logo's is uitsluitend voor identificatiedoeleinden en is niet bedoeld om enige band met of goedkeuring door een rechtenhouder aan te geven.
Resultaten filteren
AUTOMATION DIRECT
IRONHORSE
MTPM-P33-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/3HP, 180 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€235,56
Prijs met btw:
€280,32
AUTOMATION DIRECT
IRONHORSE
WG-175-040-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.74HP AT 1.0 SF, 714 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAST ...
€229,44
Prijs met btw:
€273,04
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTPM-P04-1L17
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/26HP, 90 VDC, 1749RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€129,60
Prijs met btw:
€154,23
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-V
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, FIELD-INSTALL REVERSE, CURRENT, VOLTAGE OR ...
€409,25
Prijs met btw:
€487,01
AUTOMATION DIRECT
IRONHORSE
GSD4-240-10N4X
IRONHORSE GSD4 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10A, NEMA 4X, WALL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, SC ...
€338,90
Prijs met btw:
€403,29
AUTOMATION DIRECT
IRONHORSE
MTPM-P25-1JK40
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/4HP, 12/24 VDC, 1732/3996RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€200,29
Prijs met btw:
€238,35
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 90 VDC, 1740RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€207,22
Prijs met btw:
€246,59
AUTOMATION DIRECT
IRONHORSE
WG-175-005-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 56C INPUT, DUAL, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 2.83HP AT 1.0 SF, 499 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAST ...
€175,14
Prijs met btw:
€208,42
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WG-175-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.02HP AT 1.0 SF, 596 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
€204,04
Prijs met btw:
€242,81
AUTOMATION DIRECT
IRONHORSE
MTPM-P50-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/2HP, 180 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€256,59
Prijs met btw:
€305,34
AUTOMATION DIRECT
IRONHORSE
MTPM-P13-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/8HP, 90 VDC, 1917RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€146,36
Prijs met btw:
€174,17
AUTOMATION DIRECT
IRONHORSE
WG-262-015-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.22HP AT 1.0 SF, 1577 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
€332,08
Prijs met btw:
€395,18
AUTOMATION DIRECT
IRONHORSE
WG-262-040-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
€332,08
Prijs met btw:
€395,18
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WG-262-060-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
€332,08
Prijs met btw:
€395,18
AUTOMATION DIRECT
IRONHORSE
WG-175-010-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 515 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAST ...
€247,11
Prijs met btw:
€294,06
AUTOMATION DIRECT
IRONHORSE
MTPM-1P5-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1-1/2HP, 180 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€361,68
Prijs met btw:
€430,40
AUTOMATION DIRECT
IRONHORSE
WGA-50M-030-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 30:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.94HP AT 1.0 SF, 740 LB-IN MECHANICAL OUTPUT TORQUE, 50MM CENTER DISTANCE, CAST AL ...
€179,53
Prijs met btw:
€213,64
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WGA-50M-020-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1.14HP AT 1.0 SF, 656 LB-IN MECHANICAL OUTPUT TORQUE, 50MM CENTER DISTANCE, CAST AL ...
€183,03
Prijs met btw:
€217,80
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTR2-002-1AB36
IRONHORSE MTR STANDARD EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, 2HP, 1-PHASE, 115/230 VAC, 3600RPM, TEFC, NEMA 56HC FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT.
€281,98
Prijs met btw:
€335,56
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L132
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 132RPM, 17 LB-IN FULL LOAD TORQUE, 0.67 FLA, 14.5:1 RATIO, 1/2IN SHAFT DIAMETER.
€402,31
Prijs met btw:
€478,75
AUTOMATION DIRECT
IRONHORSE
MTGP-P20-1K018
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 18RPM, 280 LB-IN FULL LOAD TORQUE, 4.41 FLA, 110:1 RATIO, 5/8IN SHAFT DIAMETER.
€407,52
Prijs met btw:
€484,94
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L039
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 39RPM, 189 LB-IN FULL LOAD TORQUE, 1.59 FLA, 46:1 RATIO, 5/8IN SHAFT DIAMETER.
€353,80
Prijs met btw:
€421,02
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTGP-P06-1L114
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/17HP, 90 VDC, 114RPM, 26 LB-IN FULL LOAD TORQUE, 0.61 FLA, 26:1 RATIO, 5/16IN SHAFT DIAMETER.
€219,81
Prijs met btw:
€261,57
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-A
DISCONTINUED BY MANUFACTURER, IRONHORSE GSD SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA.
€101,45
Prijs met btw:
€120,72
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSD7-120-1CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 120 VAC, 1-PHASE, 1/15 TO 1/8HP AT 90 VDC, 1.2A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUT ...
€288,99
Prijs met btw:
€343,90
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSD3-240-3N4
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/50 TO 1/3HP AT 90 VDC AND 1/25 TO 2/3HP AT 180 VDC, 3A, NEMA 4, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPU ...
€169,02
Prijs met btw:
€201,13
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 180 VDC, 1828RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€209,30
Prijs met btw:
€249,07
AUTOMATION DIRECT
IRONHORSE
MTGR-P20-1K039
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 39RPM, 263 LB-IN FULL LOAD TORQUE, 8.74 FLA, 44:1 RATIO, 5/8IN SHAFT DIAMETER.
€435,26
Prijs met btw:
€517,95
AUTOMATION DIRECT
IRONHORSE
MTGR-P14-1L022
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 22RPM, 280 LB-IN FULL LOAD TORQUE, 1.41 FLA, 82:1 RATIO, 5/8IN SHAFT DIAMETER.
€429,19
Prijs met btw:
€510,74
AUTOMATION DIRECT
IRONHORSE
MTGR-P07-1J036
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/15HP, 12 VDC, 36RPM, 50 LB-IN FULL LOAD TORQUE, 5.69 FLA, 50:1 RATIO, 1/2IN SHAFT DIAMETER.
€376,30
Prijs met btw:
€447,80
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L091
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 91RPM, 86 LB-IN FULL LOAD TORQUE, 1.58 FLA, 20:1 RATIO, 5/8IN SHAFT DIAMETER.
€393,64
Prijs met btw:
€468,43
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WGA-75M-080-H1
IRONHORSE MEDIUM DUTY WORM GEARBOX, 80:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 0.91HP AT 1.0 SF, 1632 LB-IN MECHANICAL OUTPUT TORQUE, 75MM CENTER DISTANCE, CAS ...
€384,98
Prijs met btw:
€458,12
AUTOMATION DIRECT
IRONHORSE
WGA-75M-010-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.25IN DIAMETER OUTPUT SHAFT, NOMINAL 5.2HP AT 1.0 SF, 1656 LB-IN MECHANICAL OUTPUT TORQUE, 75MM CENTER DISTANCE, CAST ...
€388,82
Prijs met btw:
€462,69
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
GSD7-240-5CR3
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 240 VAC, 1-PHASE, 1/8 TO 1HP AT 180 VDC, 5.5A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 3 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT ...
€260,09
Prijs met btw:
€309,51
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-R
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, BUILT-IN REVERSE, POTENTIOMETER INPUT, SCR ...
€362,55
Prijs met btw:
€431,44
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-A
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, FIELD-INSTALL REVERSE, CURRENT OR POTENTIO ...
€322,54
Prijs met btw:
€383,83
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTPM-P25-1JK44
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/4HP, 12/24 VDC, 1854/4375RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
€200,29
Prijs met btw:
€238,35
AUTOMATION DIRECT
IRONHORSE
WG-175-010-D
IRONHORSE HEAVY-DUTY WORM GEARBOX, 10:1 RATIO, NEMA 56C INPUT, DUAL, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 515 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAS ...
€204,04
Prijs met btw:
€242,81
AUTOMATION DIRECT
IRONHORSE
WGA-63M-030-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 30:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.64HP AT 1.0 SF, 1345 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, CA ...
€263,59
Prijs met btw:
€313,67
AUTOMATION DIRECT
IRONHORSE
WGA-40M-100-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 100:1 RATIO, NEMA 56C INPUT, HOLLOW, 0.75IN DIAMETER OUTPUT SHAFT, NOMINAL 0.14HP AT 1.0 SF, 244 LB-IN MECHANICAL OUTPUT TORQUE, 40MM CENTER DISTANCE, CAS ...
€150,00
Prijs met btw:
€178,50
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
MTPM-001-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1HP, 90 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€338,90
Prijs met btw:
€403,29
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
WG-262-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 182TC INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 5.24HP AT 1.0 SF, 924 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
€312,63
Prijs met btw:
€372,03
AUTOMATION DIRECT
IRONHORSE
MTPM-1P5-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1-1/2HP, 90 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€416,84
Prijs met btw:
€496,04
AUTOMATION DIRECT
IRONHORSE
MTPM-P33-1L18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/3HP, 90 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
€238,20
Prijs met btw:
€283,46
AUTOMATION DIRECT
IRONHORSE
GSD7-240-10CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 240 VAC, 1-PHASE, 1/4 TO 2HP AT 180 VDC, 10A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUTPUT ...
€256,15
Prijs met btw:
€304,82
AUTOMATION DIRECT
IRONHORSE
MTGR-P20-1K075
IRONHORSE MTGR SERIES RIGHT ANGLE SINGLE SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 75RPM, 137 LB-IN FULL LOAD TORQUE, 8.72 FLA, 23:1 RATIO, 5/8IN SHAFT DIAMETER.
€440,47
Prijs met btw:
€524,16
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L165
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 165RPM, 47 LB-IN FULL LOAD TORQUE, 1.57 FLA, 11:1 RATIO, 5/8IN SHAFT DIAMETER.
€354,67
Prijs met btw:
€422,06
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
HMC-400A30-22-FB
IRONHORSE IEC CONTACTOR, 400A, (3) N.O. POWER POLES, (2) N.O./(2) N.C. AUXILIARY CONTACTS, 100-240 VAC (50/60HZ)/100-200 VDC COIL VOLTAGE, LOW CONSUMPTION ELECTRONIC.
€424,29
Prijs met btw:
€504,90
Laat uw item herstellen
Contact opnemen
AUTOMATION DIRECT
IRONHORSE
HMC-12B30-11-DS
IRONHORSE IEC CONTACTOR, 12A, (3) N.O. POWER POLES, (1) N.O./(1) N.C. AUXILIARY CONTACTS, 24 VDC COIL VOLTAGE.
€28,90
Prijs met btw:
€34,39
